SPECIFICATION \ MODELS | SG-1225
AHD/PNC |
Working Surface of table. WxL | 1200x2500 mm |
Max. grinding surface. WxL | 1300x2600 mm |
Max. Horizontal travel of table. | 2700 mm |
Max. Cross travel of table. | 1400mm |
Distance between table surface and spindle center | 950mm |
Table speed | 5~25M/min (16~80fpm) |
Automatic crossfeed of sadle (60HZ) | 0~25 (0"~1") |
Crossfeed handwheel (1 gra) | 0.02 (0.001") PNC-0.005(0.0002") |
Crossfeed handwheel (1 rev) | 5 mm(0.2") |
Longitudinal travel adjustable from-to | 150~2800 mm |
Crossfeed travel adjustable from-to | 0~1400 (0"~55.1") |
Spindle motor | 20HPx4P *30HPx4P |
Hydraulic pump moto | 10HPx4P |
Crossfeed motor | 1/4HPx6P *1/2HPx4P PNC-AC SERVO |
Downfeed motor | 850W DC SERVO PNC-AC SERVO |
Grinding wheel (ODxTxID) | 510x50x127 mm *510X75X203.2 mm |
Spindle speed 60/50HZ | 1250RPM/60HZ 1050RPM/50HZ |
Flow rate of coolant pump | 90 I/min |
Max. load capacity addition to magnetie chuck | 3500 kgs |
Net Weight | 16000 kgs |
