HOME > Products > Plastic Injection Machines > Different Colors Injection Molding Machine DC90T~900T

Different Colors Injection Molding Machine DC90T~900T
STANDARD ACCESSORIES:
INJECTION UNIT
1. 4 speed injection
2. 4 pressure injection
3. Back pressure control for degassing melt
4. Suck back of melt at nozzle to prevent droop
5. Independently adjustable nozzle temperature
6. 2-piece nozzle construction
7. Screw head with non-return ring
8. "PID" cylinder temperature control
9. Cold start-up prevention
10. Heater breakage alarm
11. Remote setting of screw position
CLAMP UNIT
1. Heavy-duty double toggles with bushings
2. Automatic oil lubrication and alarm system
3. Mould height adjustment with hydraulic motor
4. Mould set-up switch for consistently slow platen speed
5. Remote setting of ejection position
6. Air blast on mould at the desired mould opening stroke
7. 3 mould closing speeds
8. Different mould closing and mould opening speeds
9. Mould protection with low pressure closing and alarm
10. Extra-fast closing when a switch is turned on
11. Remote setting of moving platen position
OTHERS
1. Hydraulic core pull system
2. Oil tank temperature controller with overheat alarm
3. Ejector pressure control
4. Ejector hold forward for proper knock-out
5. Mould water regulator with water flow unit
6. Clamping positioning check device
7. Microprocessor-based controller
8. Self-diagnostic device
OPTIONAL ACCESSORIES:
1. Material auto-loader 6. Oil temperature stabilizer
2. Timing hopper dryer 7. Oil level aiarm
3. Energy saving hydraulic circuit 8. Spring type sout-off nozzie
4. Rigid PVC molding device 9. Purge cover with inter lock
5. Accumulator injection circuit 10. Start-up timer (24 hours type)
Super wide guiding pillar ID design. The mold allowable width is 65% more than other factory.
Reinforced machine wall structure design. The deformation is within 0.02mm. Which meets the international standard requirement.
Wide machine frame design for stable operation.
Humanized sheet metal design for easy maintenance.
6-point mechanical turntable-positioning mechanism, the repeated positioning accuracy is 100%.
Double set of core pull oil loop for convenient application.
Design of 3 ejection cylinders to allow single color machine use.
6-point electric appliance type turntable for speed adjustment.
Central water supply system to prevent from breaking and leaking.
The whole machine is developed and designed with 3D CAD system.
Through computer aided analysis to meet the new concept of high-tech products.
Mechanism of turntable chuck (patent). Turning fitted without falling.
Super strong turntable loading (DC-220ton may reach 15000 Kg) and warrant mold fitted without falling.
The mold lock hole processed NC with; the accuracy is within 0.1mm.
High precision turntable. The change is only 0.005mm through measurement. Which meets world standard requirement.
Strong injection system. The injection pressure is more than 2700 kg/cm2. Which is suitable for low flow plastic material.
Multiple guiding pillar. Injection base design to ensure fixed nozzle.
Two pumps and electric motors. Two power saving valves. Which allow separate regulation of speed and pressure.
Super large computer monitor for easy operation.
Breakdown auto detection and diagnosis for easy maintenance.
Apply the most advanced man-machine interface controller to support the demand of customers to modify computer program.
Allow on-line to do central control system.